This is a functional Thermotron SM-16S Temperature/Humidity Test Chamber (-30oC to +177oC, 20% to 95% R.H., 16 cu. ft.) in good cosmetic and working conditions with upgraded Watlow F4 programming controller. This environmental chamber has been very well maintained and just fully tested and validated by our engineering team. The chamber has accurate control on the temperature and humidity. The chamber has a temperature range of -30 oC to +177 oC and humidity range from 20% to 95% R.H. (in the dry bulb range from + 5° to + 85° C).
Different temperatures with different humidity levels were tested in accordance with certain IEC criteria, including the most used temperature humidity conditions: 40oC / 65%RH, 60oC / 85%RH, 65oC / 95%RH, 85oC / 85% RH, -10oC, -20oC, and -30oC. The chamber is a complete ready-to-use system with everything needed for a lab testing operation. Technical support will be provided to the buyer for the initial applications, if requested. The functionalities of the compressor, heating elements, water supply and drain system, and humidity and temperature control system have just been thoroughly checked. The chamber uses 208 - 230 Volts single phase 60 H power. The operator's electronic manuals for both the chamber and the controller will be provided with the chamber.
The Thermotron SM-16S is equipped with a Therm-Alarm controller. The Therm-Alarm monitors the chamber temperature at the products under test. The Therm-Alarm provides product protection from extremely high and low temperatures. I the product temperature exceeds either limit, the Therm-Alarm disables the control circuit at the chamber circulators. This cuts off all power to the control circuitry.
(Please see all photos and video for details.)
Specification:
Condition: Refurbished
Product: Thermotron SM-16S Temperature/Humidity Test Chamber
Temperature Range: -30C to +177C
Humidity Range: 20%-95%
Workspace Volume: 16 cu. ft.
Internal Working Dimensions: 30"W x 30"D x 30"H
Exterior Chamber Dimensions: 48"W x 56"D x 78"H
Power: 230V, 1Ph, 60HZ
Programmable Controller: Wallow F4 Programming Controller
Access Port: 4" on right side
Window and Light: 20" X 20" window in door, chamber light
Freight Weight: ~975 lbs
Handling/palletizing/crating charge: $500.
Warranty: 30-Day
Return policy: See Terms.
