This is a fully functional new model T2RC Tenney Temperature/Humidity Test Chamber (-70°C to +100°C, 20% to 95% R.H., 115V power) in excellent cosmetic and working conditions. The chamber has a working space of 2 cu. ft with interior stainless-steel chamber dimensions of 16”W x 13.5”D x 16”H. Compared with T2RC chambers with standard features, this chamber has many upgraded functionalities including:
1. Tempguard IV Over-temperature Protection to protect important samples
2. Vaisala HMT360 Humidity Sensor System for accurate measurement and easy calibration
3. Viewing Window for convenient observing the sample status during chamber operation
4. N2 Purge System to prevent water condensation at low testing temperature and to achieve very low humidity level
5. Water Demineralizer System to produce DI water for the vapor generator
6. Two Access Ports (3-inch ) on both right and left sides
7. Advanced Power Control Panel for easy and safety power control
8. Upgraded Door Locking System for tight and easy open and close
9. Shelving, adjustable and removable
This environmental chamber has been very well maintained and just validated by our engineer to verify and guarantee the accuracy of temperature/humidity and the performance of the unit. The chamber has a temperature range of -70°C to +100°C and humidity range from 20% to 95% R.H. The chamber uses 115V 1 Phase power.
Different temperatures with different humidity levels were tested in accordance with certain IEC criteria, including the most used temperature humidity conditions: 40C / 65%RH, 65C / 90%RH, 85C / 85% RH, -70C, -40C, 25C, and 100C.
Temperature and humidity conditions are controlled by a two channel VersaTenn III Program / Control /Logic System. The VersaTenn control was developed specifically for environmental test chambers. Logic circuits automatically select cooling, heating, and humidity modes as required, with total programming capabilities of temperature and humidity versus time. Up to 99 steps may be programmed into 10 individual programs. Channel 1 controls temperature using an RTD sensor for temperature measurement. Channel 2 controls humidity using a Vaisala HMT360 humidity sensor for humidity measurement.
(Please see all photos and video for details.)
Specification:
Condition: Used
Product: Tenney T2RC Temperature/Humidity Environmental Chamber
Temperature Range: -70°C to +100°C
Capacity: 2 cu. ft.
Observing Window: 1
Access Port: Two. (3” diameter) One on left, one on right side
Internal Working Dimensions: 16"W x 13.5"D x 16"H
Exterior Chamber Dimensions: 26"W x 27"D x 68"H
Power: 115V
Amperage: 18A
Programmable Controller: Two channel VersaTenn III Program / Control /Logic System
Tempguard: IV Over-temperature Protection
Humidity System: Vaisala HMT360 Humidity Sensor System
N2 Purge System: ultra low humidity control and condensation control
Shelf: One
Computer Interface: RS 485 communications
Shipping Weight: ~ 600 lb.
Warranty: 30-Day
Handling/palletizing/crating charge: $300
Return Policy: See terms
